Nice FT210 pair of photocells

An optical device, with a wireless transmitter to secure on a moveable leaf, horizontally adjustable through 210 degrees and 30 degrees vertically, for automation according to Standards.

The safety level of the main edge, required by the EN12453 standard, can be achieved for any €œtype of use and any €œtype of activation by integrating an FT210 device to an 8.2kohm TCB65 type resistive sensitive edge.

The FT210 device, integrated with a resistive sensitive edge (8.2kohm), is safe against individual faults or can be used with automated systems with self-diagnosis at the start of every manoeuvre.

Relay output with 2Ah (FTA2) and 7Ah (FTA1) battery Kit for intensive use.

* The battery is not provided with the photocell.

Cutting-edge technology: The anti-collision circuit avoids interference with other out-of-sink receivers. The FT210 optical devices are equipped with a special sensor capable of recognizing when the gate is motionless, which remains in a low consumption mode and activates only when the gate is in motion.

Suitable for any architectural environment and easy to install.

Resilient and safe: Polycarbonate casing; FA1 vandal-proof metal shell (optional); low transmitter battery indicator.
The photocell has a transmitter that runs on a battery (FTA1) so it is only necessary to run a cable to one side. This is useful if a cable is damaged or one has not been installed on one side of the gateway.