Nice ROBUS400-KIT 400 BD 24Vdc kit for a sliding gate up to 400Kg

For sliding gates weighing up to 400kg.

Nice BiDirectional products indicate the status of the automations and confirm correct reception of the command.

The Kit Contains:

• 1 x RB400 1 Irreversible electromechanical gearmotor, with built-in control unit and OXIBD bidirectional radio receiver with connector for connection via Nice 
• 1 x EPMB Pair of external photocells designed for connection by Nice BlueBUS.
• 1 x EKS Key switch
• 1 x ELD
• 2 x MYGO4 433.92 MHz, 4 channels

User-friendly: Thanks to the BlueBUS system, the control unit can connect up to 7 pairs of photocells and control, security and signalling devices with just two wires.

Advanced: The RB400 is equipped with a temperature sensor, which adapts the motor power to the climatic conditions and simultaneously cuts out heat. A master/slave selection automatically synchronises two motors. This means automating two-leaf sliding gates set opposite each other is possible.

Intelligent: The RB400 is equipped with a temperature sensor, which adapts the motor power to the climatic conditions and simultaneously cuts out heat. A master/slave selection automatically synchronises two motors. This means it is possible to automate two-leaf sliding gates set opposite each other.

Safe: Acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.