Nice Robus RB500HS 24Vdc fast motor for sliding gate up to 500Kg

For hi-speed automation of sliding gates weighing up to 500kg or up to 8m long.

ROBUS is a line of irreversible electromechanical motors designed for automating sliding gates. These motors are equipped with an electronic control unit and a connector for the SMXI or OXI radio remote control receiver (both optional). Electrical connections to external devices are simplified thanks to the use of the “BLUEBUS”, a technique that allows for connecting multiple devices with only 2 wires.

ROBUS devices work with electricity; in case of lack of power from the mains, it is possible to release them using a suitable key and manually move the gate or use the optional accessory:

The PS124 backup battery that allows for completing certain manoeuvres even when there is no mains power.

• User-friendly: thanks to the Nice BlueBUS technology, the control unit can be connected to up to seven couples of photocells, control, security and signalling devices, using two wires only.
• Advanced: the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
• Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
• Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.
• Sturdy: base and release in pressure die-cast with easy to open handle. Very quiet: gear motor on bearings.