Nice Robus RB600 24Vdc motor for sliding gates up to 600Kg

Electromechanical gear motor with Nice BlueBUS technology. Versions with an electromechanical limit switch (ROBUS600).

ROBUS is a line of irreversible electromechanical motors designed for automating sliding gates. These motors are equipped with an electronic control unit and a connector for the SMXI or OXI radio remote control receiver (both optional). Electrical connections to external devices are simplified thanks to the use of the “BLUEBUS”, a technique that allows for connecting multiple devices with only 2 wires.

ROBUS devices work with electricity; in case of lack of power from the mains, it is possible to release them using a suitable key and manually move the gate or use the optional accessory:

The PS124 backup battery that allows for completing certain manoeuvres even when there is no mains power.

Advanced: ROBUS600 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die-cast with easy to open handle.

Very quiet: gear motor on bearings.