Nice Robus RB1000 24Vdc motor for sliding gates up to 1000Kg

Electromechanical gear motor with Nice BlueBUS technology. Versions with an electromechanical limit switch (ROBUS1000).

Compatible for operation with Solemyo and Opera systems.

ROBUS is a line of irreversible electromechanical motors designed for automating sliding gates. These motors are equipped with an electronic control unit and a connector for the SMXI or OXI radio remote control receiver (both optional). Electrical connections to external devices are simplified thanks to the use of the “BLUEBUS”, a technique that allows for connecting multiple devices with only 2 wires.

ROBUS devices work with electricity; in case of lack of power from the mains, it is possible to release them using a suitable key and manually move the gate or use the optional accessory:

The PS124 backup battery that allows for completing certain manoeuvres even when there is no mains power.

User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven pairs of photocells from the MoonBus series using two wires only.

Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: ROBUS1000 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a fl ashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.