Nice ROBUS400-KIT 400 BD 24Vdc kit for a sliding gate up to 400Kg
For sliding gates weighing up to 400kg.
Nice BiDirectional products indicatethe status of the automations and confirmcorrect reception of the command.
The Kit Contains:
- 1 x RB400 1 Irreversible electromechanical gearmotor, with built-in control unit and OXIBD bidirectional radio receiver with connector for connection via Nice
- 1 x EPMB Pair of external photocells designed for connection by Nice BlueBUS.
- 1 x EKS Key switch
- 1 x ELD
- 2 x ON3EBD 433.92 MHz, 3 channels, bi-directionals transmitters.
user-friendly: thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires.
Practical: control unit and PS124 buffer battery (option- al) can be connected by means of a simple connector and can be housed directly inside Robus.
Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other..
safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre..
sturdy: base and release in pressure die cast with easy to open handle.
Very quiet: gear motor on bearings.
Technical | |
Battery Backup Option | Yes |
BlueBus | Yes |
IP Rating | 44 |
Max Gate Weight | 400Kg |
Max Speed | 34cm/sec |
Motor Voltage | 24Vdc |
Solar Power Option | Yes |
Work Cycle | 35 |
Find An Installer
If you're looking for an installer, please fill in the form below.
The more information you can give us at this stage will help us to get the right installer for you.
They will contact you directly and discus your requirements.
Linkcare Trade Discounts
Linkcare provides trade discount accounts for gate automation and access control installers and engineers.
We do not advertise trade discounted prices to the public.
The only way to see reduced prices in the Linkcare shop is by logging in with an installer account username and password.
You can then search for, compare, and buy any products online at the reduced trade prices.
You can also add products into wish lists for preparing quotes.
We protect your trade prices to prevent home owners from buying gate automation and access controls, and then asking you to install it. Some wholesalers sell to anyone at trade discounted pricing. This allows them to sell well, but it potentially reduces what you can earn from each installation job.
We want to ensure that qualified and trusted gate automation and access control installation professionsls are responsible for all gate automation installation so that each one is as safe as it can be.
Apply for a trade discount here or log into your trade account to see trade discounted pricing here.