Faac 390 230Vac articulated arm kit for swing gates up to 1.8m/leaf
Electromechnical operator with articulated arm for residential swing-leaf gates with single-leaf lengths of 1.8m (3m with electric lock, can be purchased as an additional accessory).
The system has non reversing motors that hold the gate in the open and closed positions. Maxmimum anti-crushing safety thanks to the exclusive control board. The 24v version of this kit has a virtual encoder with in-built obstacle detection. If somebody comes into contact with the gate while it's in motion it will stop and back off, or reverse. It also has the option of a battery backup which ensures the gates still operate if there's a power cut.
IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and the gate pier edge is a maximum of 300mm.
This motor can also be used with a telescopic arm for bi-folding doors up to 1.5m maximum width of a single panel.
Faac 390 articulated arm gate motor for swing gates
|Double kit includes:||Single kit includes:|
|2 x 390 gate motors||390 gate motor|
|2 x articulated arms||articulated arm|
|452 MPS control board||452 MPS control board|
|Control board housing||Control board housingvv|
|Plug-in receiver/decoder 868 SLH||Plug-in receiver/decoder 868 SLH|
|2 x Two-channel transmitter 868 SLH||2 x Two-channel transmitter 868 SLH|
|Pair of photocells (safebeams)||Pair of photocells (safebeams)|
|Max Gate Leaf Length||1.8m|